How To: Moss Terminator

Moss Terminator Remover and Moss Terminator Inhibitor are products that anybody can use. In a few simple steps, you can treat your roof, driveway, tennis court, garden path or any other exterior hard surface for year round protection. 

  Step 1 - Prepare The Surface

Moss Terminator will work on any amount of moss, algae, mildew or mould without any heavy preparation or pre-treatment required. For the best results, we recommend you use a stiff brush to remove the top-layer of growth.

  Step 2 - Dilution and Application

• Light Growth Dilution Ratio:  1:6 (Moss Terminator:Water)
• Recommended Dilution Ratio:  1:4 (Moss Terminator:Water)
• Heavy Growth Dilution Ratio: 1:2  (MossTerminator:Water).

Mix Moss Terminator Remover or Inhibitor with cold water with a dilution rate based on the level of growth that you are treating. Apply on with with a standard gardening watering can, or a low pressure pump sprayer for the best results.

  Step 3 - Wait a Day and Wash Away

In most cases, results can be seen within 24-48 hours. This depends on the weather and ambient conditions in your area, so we suggest waiting up to 72 hours to see the full results - indicated by the moss turning a brown/orange colour.

The dead moss, algae, mildew or mould will naturally biodegrade over the coming days and weeks, particularly if it rains. You can get rid of it immediately by using a high pressure hose to wash down the surface.

See Moss Terminator In Action